1962 PLYMOUTH VALIANT 2 DOOR SEDAN – Jason Stevens

It is always exciting to get a story in that is all in the family. Such is the case with Jason Stevens 1962 Plymouth Valiant.

Originally purchased by his grandfather, this vehicle has served his family well. Going from grandfather, to aunt and now to him, he had promised his aunt that he would restore it.

This is the story of that promise being kept. Continue reading

Advertisements

1969 Shelby GT 500 – Brian Shear

How often do you get to hear the story of a car, purchased as a kid and still owned, decades later. Well, Brian has just that story.

Purchased from his neighbor as a teenager, it is still his and is going through a restoration.

Make sure to go to the end to see the photos.


Disclaimer: Customs N Classics does not charge for any articles. These are free and are derived from emails, chat messages and other forms of communication. The details are from the owner/trustee and are not physically verified. Should there be any issues with this story, please let us know, privately and we will do our best to correct any mistakes.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

What type of vehicle is this?

1969 Shelby GT 500 vin # 480477 sports roof ( fastback)

Black jade in color w/ white stripe. One of 1553 made.

They weren’t done in any sequenced numbers but you could say it’s the 477th made. 3150 total were made in 1969, of which 1868 were GT 500’s (333 convertables)

Who is the first owner of the project and is it still their project?

I’m the 3rd owner. The 1st was J. R. Slavic whom I’ve talked to on Facebook, and the 2nd was Ronald Comer.

When was it purchased?

I purchased it in 1971 late in the year. Drove it to school just after the Christmas break. It had approx 32,000 miles on it.

How much was it purchased for?

I paid $3,250 for it . that was all the money I had , I think my parents kicked it a few to make the sale.

Was this a father/son, Daughter project?

Not really a father son project but I do have a son who is very involved with cars.

Why this particular vehicle?

The 2nd owner was a neighbor and seeing it drive by the house was all I needed to want it.

Give me some backstory, are you a mechanic, do you like to fabricate, are you really good at body work, etc. Some info about you.

I grew up the son of a gas station owner/mechanic. Loved cars since I started to drive and before. I Would spend weekends at my dad’s shop cleaning car parts for his workers.

Info about the vehicle prior to starting it. (i.e., condition, missing parts, just needed paint, no engine, etc.)

The car has 85,000 Michigan miles on it.

We use salt on our roads so you can guess what condition it is in.

When I was 50 I decided to do a ground up restoration on it. The uni body has taken quite a hit from the salt.

The right side forward inner fender extension is bad along with the core support. Rear quarters have damage and the doors bottom edges, as well.

Typical stuff that happens to car in Michigan.

What have you done to it so far?

Having the car for so long a lot was done to it; being in the auto business I had access to Ford parts supply at a 20% off discount rate( dealer pricing).

Rebuilt the motor years ago and again, just recently.

I added factory air-conditioning, power driver’s seat, intermittent windshield wipers, power antenna, aluminum intake , carburetor upgrade from 735 cc to 780 cc, cruise control , extra lighting ( ashtray) , oil cooler.

The inner fender extension has been removed along with the core support and torque box.

Stripped to bare metal and sand blasted (doors forward), Motor and trans removed and rebuilt .

The trans is a C-6 auto with internal upgrades to it.

Motor has been balanced and blueprinted dyno at 477 hp.

Where is it now, in the rebuild stage?

Car has been sitting for years with above work mentioned to it. Sand blasted with a light coat of rust on the bare metal. Striped from the doors forward.

Any special parts you have used?

I was fortunate to have a friend whose father owned a junk yard, so on the weekends I would go and strip cars for parts to use and save for future use, paying very little if at all for them.


The story; I grew up the son of a gas station owner. I had extensive access to any thing cars. Our neighbor had this car and would drive by with it . I fell in love with it. One day I was driving by their house and he was washing it . I pulled in the drive to talk and he said it was for sale. selling it because his daughter wouldn’t drive it. It scared her to drive it. Would rather drive the corvette, that didn’t scare her to drive. I told him I would buy it on the spot , he replied that someone was coming that day to look at I , but if it fell through I could have it. Needless to say, I bought it the next day. My dad required that his main mechanic look at it. The neighbor drove it to the garage to be checked out but I got to drive it home. When I pulled out into the street and got up to 30 mph he said that he knows that I has itching to floor it. Go ahead he said and I did. At that speed it was in the best  power curve and the trans kicked down into 1st gear. Going sideways to the right and shifting into 2nd going sideways the other way. I screamed holy shit and was shaking the rest of the way home.

There was a time I was leaving collage parking lot , got on it and when it shifted into 2nd gear the studs that are welded on the torque converter sheared off , needed a tow to the shop that day, then the time the rear leaf spring snapped or the time the seat back broke , and the universal joint going . just a few things, I drive hard.

One day my mom drove it and got a speeding ticket, and when my dad went shopping and slid sideways across the street when pulling out. A trip from my house or home from Ann arbor takes 50 min. One night I did it in 25. We were going 120 – 130 mph home.

The car hasn’t run in years I just drag it from home to home as I go. Currently it’s in the 2nd garage I built for it. Hoping to finish the restoration I’ve started. I WILL finish it.

I have every receipt for anything I purchased for it going back to day 1. Having Ford access I have purchased all Shelby related parts to do a factory correct NOS Restoration on it ,stuff purchased more than 30 years ago.



Customs N Classics store – Amazon Store showcasing some tools, some models, some “vintage” metal signs and some automotive books

We are on Twitter: @customsnclassic

Instagram: customs_n_classics

YouTube: Customs N Classics Channel

Pinterest: Customsnclassics

We have 2 pages on Facebook: Customs and Classics & Customs and Classics #2

“Silver Bullet” – 2013 Chevy Camaro LS – Shane & Erin Wilder

Often, when we think of a dream car, we think of an older classic, maybe an antique. The story that is associated with our dream car is usually extraordinary, because, after all, it created a dream. So, what happens when a lady has a dream and 2 different men come into her life and make it happen? Read on to find out how the Silver Bullet became a dream come true. Continue reading

2017 – A Year in Review

Well, another year has gone by and we have had some milestones happen. This has been a good year for us, so, in an effort to recap what has been happening, let’s look back at last years review. (Make sure to scroll down and check out all of the articles. Also, write a comment on your favorite article, or articles.)


You can click here to see last years review.

Disclaimer: Customs N Classics does not charge for any articles. These are free and are derived from emails, chat messages and other forms of communication. The details are from the owner/trustee and are not physically verified. Should there be any issues with this story, please let us know, privately and we will do our best to correct any mistakes.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

As for this year, well, let’s just say it started a little slow. January through April, we had a total of 1,019 views to our site. Four months and we barely had any viewership, which made me wonder if this was at all worth it.

Continue reading

1967 Pontiac Firebird – Joseph Medulla

Like the Camaro, the Firebird came out and stole our hearts. The curves, the power, the fact that it was a Pontiac, these were things that allowed it to quickly become an American icon, of sorts.

Read below to see how Joseph resurrected his 1967 Pontiac Firebird.

Make sure to go to the end and check out all of the photos. (Over 300)


Disclaimer: Customs N Classics does not charge for any articles. These are free and are derived from emails, chat messages and other forms of communication. The details are from the owner/trustee and are not physically verified. Should there be any issues with this story, please let us know, privately and we will do our best to correct any mistakes.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

18342420_10203340463590039_8041502667904522206_nWhat type of vehicle?

1967 Firebird

 

When was it purchased?

I acquired this car in 2007 and traded my very low mileage 1994 Z-28 for it. I have always worked on cars and completed a few projects, but always wanted to build a classic car my way. Continue reading

1979 Camaro Berlinetta – James Cameron

Sometimes, we have plans and then reality hits and we have to change those plans. This Camaro was to be a 1978 Trans Am, so, you could say that this transformation This Camaro started as a father/son project and became a memorial to the father. This project is now scheduled to take James mother on a coastal tour.

Check below to read the incredible journey this car has taken. Make sure to go to the end and check out all of the pictures.


Disclaimer: Customs N Classics does not charge for any articles. These are free and are derived from emails, chat messages and other forms of communication. The details are from the owner/trustee and are not physically verified. Should there be any issues with this story, please let us know, privately and we will do our best to correct any mistakes.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

 

What type of vehicle is this?

It’s a 1979 Camaro Berlinetta Continue reading

1940 Chevy Business Coupe Model Master 85 – Bob Malin

Not every car is Hot Rod material, but, some cars just scream to become one. The level of work it takes to make something into a Hot Rod can be extensive, to say the least, but, when finished, the joy is insurmountable!

This is the story of a guy, a Business Coupe and a desire to make a Hot Rod. Read on and enjoy!


Disclaimer: Customs N Classics does not charge for any articles. These are free and are derived from emails, chat messages and other forms of communication. The details are from the owner/trustee and are not physically verified. Should there be any issues with this story, please let us know, privately and we will do our best to correct any mistakes.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

Bob, what type of vehicle is this?

Car is a 1940 Chevy Business Coupe Model Master 85

Who is the first owner of the project?

Not sure of the original owner, but I purchased the car from a person in Brookfield, WI.

When did you purchase it and, if you are ok discussing it, for how much?

I purchased the car in 1996 for $5,000.00, to make a hot rod out of it myself

Why did you choose this vehicle?

I chose this vehicle because when I was 15, I knew a neighbor who had a 1940 Ford Coupe, black, 327, 4 speed with a Indian blanket interior. It was low, black and wicked. I wanted to build a similar car one day.

Give me some backstory, are you a mechanic, do you like to fabricate, are you really good at body work, etc. Some info about you.

I am an Industrial Designer and have been for 45 years. I graduated the University of Bridgeport, Bridgeport, CT.

An Industrial designer is able to come up with concepts, engineer it, and make prototypes of: Consumer Products, Automobile Designs, Interior Design, Package Design, Exhibit Designs, Graphic Designs Literally anything that can be thought of and engineered, an Industrial Designer can do.

I’ve worked on cars since I was a teen. I have good mechanical and fabrication skills

Give us some information about the vehicle prior to starting it.

When I purchased the car, it had been restored 15 years earlier to stock and put into storage. It was driven a few times a year. It was in ok driving condition when I bought it.

What have you done to it so far?

Initially, I put duel Stromberg’s and split manifold with new radial on it. I drove a few years then started in on my transformation.

First I purchased a 292 truck motor, rebuilt it with all new 270 Wolverine Cam, 3×2 Offy Intake, New split manifold, T-5 Trans, a rebuilt 10 bolt. New IFS with 11” power discs, new drums in the back with Chassis engineering springs and shocks. All new fuel and brake lines, custom dash with classic gauges, Vintage Air/Heat/Defrost, new interior and trunk lining.

A few years later, I had a few knowledgeable guys and me, chop the top. It’s a custom chop where none of the center of the roof was cut to keep the roundness. 3.5” in the front and 4” from the back. The roof was moved forward and the rear window leaned forward to meet. This was not an easy chop and it took a while to get it right.

Where is it now, in the rebuild stage?

The car is completed now and has been since 2005.

Any special parts you have used?

There are a lot of custom touches that you see but don’t really know what I did. The wing vents can be slid out to have a full opening window. The wheels are one-off chrome smoothies with custom offsets. I did the flames. Special one off metallic pearl paint. Custom made dash, grill cover, etc.

I purchased the essential engine parts from Tom Langdon @ Stovebolt Engineco in Livona MI. He’s the best and used to work at GM 6 cylinder division.

I purchased misc parts from a lot of vendors. Chevs of the 40’s, Mid America Corvettes, Yogi’s parts and Speedway.

Any help you have gotten?

I did have a lot of help with the heavy stuff. I really do appreciate all the extra folks that helped me transform this stock Chevy into my dream ride. With careful planning and designing, everyone should build their dream car.

I had help with the Bonneville Chop on my car. 2 guys, Larry and Donnie from south Milwaukee, who chop Mercs, helped me with the cuts. I was there for welding, grinding and block sanding. They worked out of their garage.

I also use Doug Bennet in Milwaukee (Bennet Coachworks) for the help in installation of the drive train and wiring.


From Bob

My wife and I have taken many trips in the Coupe. From Ohio to Florida and to Long Island, NY. Car always ran great, got good mileage and lots of “Thumb’s up”. We have gone on weekend trips to Bed-n-breakfast places and always got “preferred” parking to keep an eye on it. I have driven it to all 100+ car events in the past. Kalamazoo, Back to the 50’s, Indy, Columbus, Louisville, Corn roast in Wi. As we were driving through the Amish Country, we stopped for lunch at a diner. We were the only vehicle in the parking lot among a half a dozen Horse Drawn carriages. They all commented on the car when we sat down for lunch and then came out to look at it when we left.

I have enjoyed my car for quite some time. It is for sale as I want to tackle a new project. The Boss (wife) says it needs to go to fund my new project. Someone out there will get a truly Kool ride!

If you are interested in buying this car, please contact Bob, via email, at rimalin21@gmail.com


Enjoy the photos below.


Customs N Classics store – Amazon Store showcasing some tools, some models, some “vintage” metal signs and some automotive books

We are on Twitter: @customsnclassic

Instagram: customs_n_classics

YouTube: Customs N Classics Channel

Pinterest: Customsnclassics

We have 2 pages on Facebook: Customs and Classics & Customs and Classics #2