“Silver Bullet” – 2013 Chevy Camaro LS – Shane & Erin Wilder

Often, when we think of a dream car, we think of an older classic, maybe an antique. The story that is associated with our dream car is usually extraordinary, because, after all, it created a dream. So, what happens when a lady has a dream and 2 different men come into her life and make it happen? Read on to find out how the Silver Bullet became a dream come true. Continue reading

Advertisements

2017 – A Year in Review

Well, another year has gone by and we have had some milestones happen. This has been a good year for us, so, in an effort to recap what has been happening, let’s look back at last years review. (Make sure to scroll down and check out all of the articles. Also, write a comment on your favorite article, or articles.)


You can click here to see last years review.

Disclaimer: Customs N Classics does not charge for any articles. These are free and are derived from emails, chat messages and other forms of communication. The details are from the owner/trustee and are not physically verified. Should there be any issues with this story, please let us know, privately and we will do our best to correct any mistakes.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

As for this year, well, let’s just say it started a little slow. January through April, we had a total of 1,019 views to our site. Four months and we barely had any viewership, which made me wonder if this was at all worth it.

Continue reading

1967 Pontiac Firebird – Joseph Medulla

Like the Camaro, the Firebird came out and stole our hearts. The curves, the power, the fact that it was a Pontiac, these were things that allowed it to quickly become an American icon, of sorts.

Read below to see how Joseph resurrected his 1967 Pontiac Firebird.

Make sure to go to the end and check out all of the photos. (Over 300)


Disclaimer: Customs N Classics does not charge for any articles. These are free and are derived from emails, chat messages and other forms of communication. The details are from the owner/trustee and are not physically verified. Should there be any issues with this story, please let us know, privately and we will do our best to correct any mistakes.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

18342420_10203340463590039_8041502667904522206_nWhat type of vehicle?

1967 Firebird

 

When was it purchased?

I acquired this car in 2007 and traded my very low mileage 1994 Z-28 for it. I have always worked on cars and completed a few projects, but always wanted to build a classic car my way. Continue reading

1979 Camaro Berlinetta – James Cameron

Sometimes, we have plans and then reality hits and we have to change those plans. This Camaro was to be a 1978 Trans Am, so, you could say that this transformation This Camaro started as a father/son project and became a memorial to the father. This project is now scheduled to take James mother on a coastal tour.

Check below to read the incredible journey this car has taken. Make sure to go to the end and check out all of the pictures.


Disclaimer: Customs N Classics does not charge for any articles. These are free and are derived from emails, chat messages and other forms of communication. The details are from the owner/trustee and are not physically verified. Should there be any issues with this story, please let us know, privately and we will do our best to correct any mistakes.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

 

What type of vehicle is this?

It’s a 1979 Camaro Berlinetta Continue reading

1940 Chevy Business Coupe Model Master 85 – Bob Malin

Not every car is Hot Rod material, but, some cars just scream to become one. The level of work it takes to make something into a Hot Rod can be extensive, to say the least, but, when finished, the joy is insurmountable!

This is the story of a guy, a Business Coupe and a desire to make a Hot Rod. Read on and enjoy!


Disclaimer: Customs N Classics does not charge for any articles. These are free and are derived from emails, chat messages and other forms of communication. The details are from the owner/trustee and are not physically verified. Should there be any issues with this story, please let us know, privately and we will do our best to correct any mistakes.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

Bob, what type of vehicle is this?

Car is a 1940 Chevy Business Coupe Model Master 85

Who is the first owner of the project?

Not sure of the original owner, but I purchased the car from a person in Brookfield, WI.

When did you purchase it and, if you are ok discussing it, for how much?

I purchased the car in 1996 for $5,000.00, to make a hot rod out of it myself

Why did you choose this vehicle?

I chose this vehicle because when I was 15, I knew a neighbor who had a 1940 Ford Coupe, black, 327, 4 speed with a Indian blanket interior. It was low, black and wicked. I wanted to build a similar car one day.

Give me some backstory, are you a mechanic, do you like to fabricate, are you really good at body work, etc. Some info about you.

I am an Industrial Designer and have been for 45 years. I graduated the University of Bridgeport, Bridgeport, CT.

An Industrial designer is able to come up with concepts, engineer it, and make prototypes of: Consumer Products, Automobile Designs, Interior Design, Package Design, Exhibit Designs, Graphic Designs Literally anything that can be thought of and engineered, an Industrial Designer can do.

I’ve worked on cars since I was a teen. I have good mechanical and fabrication skills

Give us some information about the vehicle prior to starting it.

When I purchased the car, it had been restored 15 years earlier to stock and put into storage. It was driven a few times a year. It was in ok driving condition when I bought it.

What have you done to it so far?

Initially, I put duel Stromberg’s and split manifold with new radial on it. I drove a few years then started in on my transformation.

First I purchased a 292 truck motor, rebuilt it with all new 270 Wolverine Cam, 3×2 Offy Intake, New split manifold, T-5 Trans, a rebuilt 10 bolt. New IFS with 11” power discs, new drums in the back with Chassis engineering springs and shocks. All new fuel and brake lines, custom dash with classic gauges, Vintage Air/Heat/Defrost, new interior and trunk lining.

A few years later, I had a few knowledgeable guys and me, chop the top. It’s a custom chop where none of the center of the roof was cut to keep the roundness. 3.5” in the front and 4” from the back. The roof was moved forward and the rear window leaned forward to meet. This was not an easy chop and it took a while to get it right.

Where is it now, in the rebuild stage?

The car is completed now and has been since 2005.

Any special parts you have used?

There are a lot of custom touches that you see but don’t really know what I did. The wing vents can be slid out to have a full opening window. The wheels are one-off chrome smoothies with custom offsets. I did the flames. Special one off metallic pearl paint. Custom made dash, grill cover, etc.

I purchased the essential engine parts from Tom Langdon @ Stovebolt Engineco in Livona MI. He’s the best and used to work at GM 6 cylinder division.

I purchased misc parts from a lot of vendors. Chevs of the 40’s, Mid America Corvettes, Yogi’s parts and Speedway.

Any help you have gotten?

I did have a lot of help with the heavy stuff. I really do appreciate all the extra folks that helped me transform this stock Chevy into my dream ride. With careful planning and designing, everyone should build their dream car.

I had help with the Bonneville Chop on my car. 2 guys, Larry and Donnie from south Milwaukee, who chop Mercs, helped me with the cuts. I was there for welding, grinding and block sanding. They worked out of their garage.

I also use Doug Bennet in Milwaukee (Bennet Coachworks) for the help in installation of the drive train and wiring.


From Bob

My wife and I have taken many trips in the Coupe. From Ohio to Florida and to Long Island, NY. Car always ran great, got good mileage and lots of “Thumb’s up”. We have gone on weekend trips to Bed-n-breakfast places and always got “preferred” parking to keep an eye on it. I have driven it to all 100+ car events in the past. Kalamazoo, Back to the 50’s, Indy, Columbus, Louisville, Corn roast in Wi. As we were driving through the Amish Country, we stopped for lunch at a diner. We were the only vehicle in the parking lot among a half a dozen Horse Drawn carriages. They all commented on the car when we sat down for lunch and then came out to look at it when we left.

I have enjoyed my car for quite some time. It is for sale as I want to tackle a new project. The Boss (wife) says it needs to go to fund my new project. Someone out there will get a truly Kool ride!

If you are interested in buying this car, please contact Bob, via email, at rimalin21@gmail.com


Enjoy the photos below.


Customs N Classics store – Amazon Store showcasing some tools, some models, some “vintage” metal signs and some automotive books

We are on Twitter: @customsnclassic

Instagram: customs_n_classics

YouTube: Customs N Classics Channel

Pinterest: Customsnclassics

We have 2 pages on Facebook: Customs and Classics & Customs and Classics #2

Hot Rod Fuel Hose – The Company

Recently, I found out that there is this small start up company that was making a product based on real needs of the Hot Rod community. (Actually, I won a free Sticker and that led me to their story.)

These guys had found a need, based on their own issues in building a project and decided that it would be a great idea to make a product that was superior. Below, you can read their story and see why they did it, for yourself.


Customs N Classics does not support one product over the other, rather, strives to share the stories of those in the automotive world for others to read and make informed decisions.
While we may write a feature, or review a part or tool, it is in no way to be interpreted that we feel one is better or more deserving than another, unless we specifically state it. With that in mind, please enjoy the following article, as it is derived from what they have already written on their web site.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.

This is their story, who they are and why they feel they will succeed.

So, Justin Gorzitza, tell me a bit about yourself, why you started this.

editing_1345_1_824d1d4f-ed92-48a1-8f33-4ed463421b2c_360x

Check them out at hotrodfuelhose.com

High school was when I first inherited my dad’s 1980 Chevy C10, boy did I ever have big plans for this thing. At 15 when I started working on this puppy I wanted it to have the best of everything and spent way too much money to try and make that happen. I also had no clue what the hell I was doing and a lack of confidence in how to make it happen. I took a lot of stuff apart including the engine, transmission, and the rest of the drive train. Spent too much money at the speed shop and then didn’t know how to get the thing back together again.

It Sat and Sat and Sat, I got married, had a Son, and It followed me as I moved multiple times but never really got the time or the desire to get back onto this project until 2015 when I finally got serious again. My desires changed at this time and I thought it would be really impressive to rebuild this back to a stock look and still be a reliable driver. You can check out my build thread on 67-72chevytrucks.com The idea was to impress my dad with this truck that looks just like when he bought it.

1980 C10 by Hot Rod fuel hose

So, what made you get into fuel hoses and lines? Why would that even be an issue?

I had been reading lot’s on fuel injection over the years and considered installing a Mega Squirt at one time and converting some type of other injection system to my 383 stroker that I had built, but was always turned off by how much work would have needed to go into learning how the mega squirt and fuel injection system worked.

The year I started back seriously on finishing this project a company called FiTech released an affordable fuel injection system and it had great reviews and was gaining a following of automotive enthusiasts. So I gave it a shot and ordered one up.

I went down to the local speed shop and was seeking out ways to install my fuel system –

IMG_20170913_102637_e8ca6b90-ba1e-420e-a382-19e48966f6c5_1024x1024@2x

A sample of their fuel line and connections

Well, they want almost as much cash for the rubber stainless steel braided line as I paid for my EFI FiTech system. That’s not right! I thought I could do better than that, my gut told me so.

I reached out to a ton of manufacturers and ordered samples, tested the product, and negotiated like crazy.

Once I had a product I believed in, at a price I felt is better suited to people like me, we ordered some. A LOT of hose and A LOT of fittings – probably too much but we believed so strongly that there is an opportunity for a High Quality PTFE braided hose in the market with awesome looking AN fittings that we committed to taking the idea forward.


A side note, so everyone is up on the terms and what the products are.

What is PTFE hose and what is it used for?

PTFE is a specific chemical composition commonly referred to as Teflon. We chose to only offer PTFE lined AN braided hoses due to better chemical resistance with common automotive fluids and specifically the higher ethanol content gasoline that is offered today.

It is most commonly used for fuel lines and transmission cooler lines. Many guys use it for LS swaps, EFI installations, and good old reliable carbs. Typically fitting adapters are needed to convert to an AN style fitting.

What are the fittings made from?

Our PTFE hose end fittings are made from 6061 Aluminum alloy and anodized to give it a sharp look. We also engrave our logo to really make them pop.


IMG_20171023_180547_b87114bc-2c13-4b1c-a2db-a52971004bf7_1024x1024@2x

A close up look at a fitting with their logo.

Ok, so, you have your fittings, you have your hoses, what’s next?

Well, we are still a new business selling PTFE hose for Hot Rods so we want to do a great job at getting our name out. Sales so far have been very strong and in fact above expectations. We have had to order new product already thanks to support from our Awesome customers and we look forward to becoming a premier supplier of Hot Rod fuel hose and AN Fittings and continuing to search out new opportunities for finding quality products at great prices so we can all continue to enjoy this hobby we have (and that our wives definitely don’t like) and I hope you will all support us and let your friends and hot rodding buddies know we exist as that has definitely been the biggest challenge in this venture so far.

This is a new company with some great reviews already. (Check out their reviews!)

Want to contact them? Check it out!

Email us at info@hotrodfuelhose.com

Contact us on FACEBOOK

Call US (866) 797-0384.

Let them know you saw them here. We don’t get anything from it, but, it would help them to know that they are out there.


Customs N Classics store – Amazon Store showcasing some tools, some models, some “vintage” metal signs and some automotive books

We are on Twitter: @customsnclassic

Instagram: customs_n_classics

YouTube: Customs N Classics Channel

Pinterest: Customsnclassics

We have 2 pages on Facebook: Customs and Classics & Customs and Classics #2

1965 Cadillac Combo (Hearse/Ambulance) by Superior Coaches

This combo is just getting started in it’s journey to a new life, but, oh, what a story it has already had. We will follow the journey as they go throughout the year and hopefully, by next Halloween, it will be ready for a new feature article. So, sit back and enjoy learning about this former “Razorbacker” and see where they plan on taking it in the future.
Also, make sure to check out all of the pictures at the end.


What type of vehicle?
1965 Cadillac Combo (Hearse/Ambulance) by Superior Coaches
Who is the first owner of the project and is it still their project?
It was bought from service in Tennessee by  Joe & Edith Reed of Conway, AR in the 1970’s to be used to travel to every Arkansas Razorback game. They no longer own it, they sold it in 1998.
When was it purchased?
I purchased it in October of 2017.
How much was it purchased for?
$3500.00
Was this a father/son, Daughter project?
No
Why this vehicle?
It is one of 3 hearses/coaches I own – the others being a 1998 Cadillac and a 1987 Cadillac both by Superior Coaches.
I’ve always wanted a hearse. They’re beautiful, unique, and versatile vehicles. They’re made to order, so no two are alike.
My favorite thing about the mid 60’s Superior made coaches, is the roof line. It gives them such a sexy silhouette.
Give me some backstory, are you a mechanic, do you like to fabricate, are you really good at body work, etc. Some info about you.
I’m no mechanic, but cars are in my DNA.
I was raised in a junkyard and spent summers and weekends at racetracks. My grandpa and step-dad were tow truck drivers, and I was babysat at the junkyard. I learned to read by reading license plates and badges on cars.
Info about the vehicle prior to starting it. (i.e., condition, missing parts, just needed paint, no engine, etc.)
I’ve only had the car for about 2 weeks. So far we know it needs some carburetor work, and some wiring (the headlights work when they feel like it).
She runs, but she is not exactly street ready. It once had a spare tire mounted on the rear door, which the door isn’t set up to support, so the hinges are sprung and the latch is broke.
It needs paint, a windshield, and quarter window.
What have you done to it so far?
Nothing yet, still in the planning stages. Still mapping things out, figuring out what all we need to do to get her back on the road.
Any help you have gotten? 
My boyfriend, Paul, and our friend Ian at Oak Valley Customs has been helpful with advice and is going to help here soon with getting her going.
Also the myriad of hearse clubs & Facebook groups that have been helpful in sourcing parts.
The car has quite a history. Like I said it was purchased from service in Tennessee, and brought to AR to be used to travel to Razorback games. It was originally black (according to the handwritten TN title included in the paperwork I was given when I bought it), and was painted red & white and lettered in the 70’s.  It was then called “The Razorbacker,” and was featured in a 1979 issue of Southern Living magazine, as well as other local publications. (I’m told, although I only have the copy of SL, not the other publications.)
The rear compartment was customized to seat 6 with a bench seat and fold down seats. The rollers and casket/gurney bed was removed and red shag carpet was installed.
The car has sliding glass dividers that separate the cab from the rear – between this divider and the bench seat, beer coolers were installed.
Mrs Reed hand sewed the curtains that are still in the rear. They installed a PA system, and several novelty horns as well.
The documentation I have with it says that a man named Richard Nicholson bought the car in 1998 and was trying to get it registered/recognized as a state historical object. What I gathered from the paperwork, it wasn’t old enough at the time. I’m not sure why he sold it, he seemed pretty determined to do something with it as late as 2013. The guy I bought it from didn’t seem to know much about the car aside from the paperwork, and had just bought it on a whim, then discovered they aren’t cheap vehicles to restore.
I don’t plan to restore it back to The Razorbacker, but I think I am going to keep it red (maybe red & white), get the upholstery redone, get her running again – hopefully next year in time for Hearsefest in Hell, MI.



Check out our other Hearse stories

1956 Hearse

1990 Hearse

1991 Hearse


Customs N Classics store – Amazon Store showcasing some tools, some models, some “vintage” metal signs and some automotive books

We are on Twitter: @customsnclassic

Instagram: customs_n_classics

YouTube: Customs N Classics Channel

Pinterest: Customsnclassics

We have 2 pages on Facebook: Customs and Classics & Customs and Classics #2

We also have a page for small donations to keep these stories going and this website up. Please consider going and making a small donation. ($5)