Recently, I found out that there is this small start up company that was making a product based on real needs of the Hot Rod community. (Actually, I won a free Sticker and that led me to their story.)
These guys had found a need, based on their own issues in building a project and decided that it would be a great idea to make a product that was superior. Below, you can read their story and see why they did it, for yourself.
Customs N Classics does not support one product over the other, rather, strives to share the stories of those in the automotive world for others to read and make informed decisions.
While we may write a feature, or review a part or tool, it is in no way to be interpreted that we feel one is better or more deserving than another, unless we specifically state it. With that in mind, please enjoy the following article, as it is derived from what they have already written on their web site.
If you enjoy Customs N Classics articles, please consider a donation to help us with the costs associated in running this site.
This is their story, who they are and why they feel they will succeed.
So, Justin Gorzitza, tell me a bit about yourself, why you started this.
High school was when I first inherited my dad’s 1980 Chevy C10, boy did I ever have big plans for this thing. At 15 when I started working on this puppy I wanted it to have the best of everything and spent way too much money to try and make that happen. I also had no clue what the hell I was doing and a lack of confidence in how to make it happen. I took a lot of stuff apart including the engine, transmission, and the rest of the drive train. Spent too much money at the speed shop and then didn’t know how to get the thing back together again.
It Sat and Sat and Sat, I got married, had a Son, and It followed me as I moved multiple times but never really got the time or the desire to get back onto this project until 2015 when I finally got serious again. My desires changed at this time and I thought it would be really impressive to rebuild this back to a stock look and still be a reliable driver. You can check out my build thread on 67-72chevytrucks.com The idea was to impress my dad with this truck that looks just like when he bought it.
So, what made you get into fuel hoses and lines? Why would that even be an issue?
I had been reading lot’s on fuel injection over the years and considered installing a Mega Squirt at one time and converting some type of other injection system to my 383 stroker that I had built, but was always turned off by how much work would have needed to go into learning how the mega squirt and fuel injection system worked.
The year I started back seriously on finishing this project a company called FiTech released an affordable fuel injection system and it had great reviews and was gaining a following of automotive enthusiasts. So I gave it a shot and ordered one up.
I went down to the local speed shop and was seeking out ways to install my fuel system –
A sample of their fuel line and connections
Well, they want almost as much cash for the rubber stainless steel braided line as I paid for my EFI FiTech system. That’s not right! I thought I could do better than that, my gut told me so.
I reached out to a ton of manufacturers and ordered samples, tested the product, and negotiated like crazy.
Once I had a product I believed in, at a price I felt is better suited to people like me, we ordered some. A LOT of hose and A LOT of fittings – probably too much but we believed so strongly that there is an opportunity for a High Quality PTFE braided hose in the market with awesome looking AN fittings that we committed to taking the idea forward.
A side note, so everyone is up on the terms and what the products are.
What is PTFE hose and what is it used for?
PTFE is a specific chemical composition commonly referred to as Teflon. We chose to only offer PTFE lined AN braided hoses due to better chemical resistance with common automotive fluids and specifically the higher ethanol content gasoline that is offered today.
It is most commonly used for fuel lines and transmission cooler lines. Many guys use it for LS swaps, EFI installations, and good old reliable carbs. Typically fitting adapters are needed to convert to an AN style fitting.
What are the fittings made from?
Our PTFE hose end fittings are made from 6061 Aluminum alloy and anodized to give it a sharp look. We also engrave our logo to really make them pop.
A close up look at a fitting with their logo.
Ok, so, you have your fittings, you have your hoses, what’s next?
Well, we are still a new business selling PTFE hose for Hot Rods so we want to do a great job at getting our name out. Sales so far have been very strong and in fact above expectations. We have had to order new product already thanks to support from our Awesome customers and we look forward to becoming a premier supplier of Hot Rod fuel hose and AN Fittings and continuing to search out new opportunities for finding quality products at great prices so we can all continue to enjoy this hobby we have (and that our wives definitely don’t like) and I hope you will all support us and let your friends and hot rodding buddies know we exist as that has definitely been the biggest challenge in this venture so far.
This is a new company with some great reviews already. (Check out their reviews!)
Want to contact them? Check it out!
Email us at email@example.com
Contact us on FACEBOOK
Call US (866) 797-0384.
Let them know you saw them here. We don’t get anything from it, but, it would help them to know that they are out there.
Customs N Classics store – Amazon Store showcasing some tools, some models, some “vintage” metal signs and some automotive books
We are on Twitter: @customsnclassic
YouTube: Customs N Classics Channel
We have 2 pages on Facebook: Customs and Classics & Customs and Classics #2